Dynamic Range Setting (Drc) - Dab - Sangean DPR-17 Manual

Dynamic Range Control (DRC) settings – DAB
The DRC facility can make quieter sounds easier to hear when your
radio is used in a noisy environment.
1. Press the Power button to switch on your radio.
2. Press the Band button to choose the DAB band, then press and hold
the Info button to enter the advanced setting.
3. Rotate the Tuning control until the display shows "DRC value".
Press and release the Tuning control to enter the setting.
4. Rotate the Tuning control to select the required DRC setting
(default is 0)
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster
DRC 1 DRC is set as sent by broadcaster
5. Press and release the Tuning control to confirm the setting.
The display will return to radio mode.
Note: Not all DAB broadcasts are able to use the DRC function.
3-5
GB
14