Installation; Installing Cx-Position And Finsgateway - Omron SYSMAC W398-E1-1 Operation Manual

Installation

2-1

Installation

Note
2-1-1

Installing CX-Position and FinsGateway

1,2,3...
10
To use the CX-Position, the following software must be installed on the same
computer.
• CX-Position
• FinsGateway Version 3 Embedded Edition
1. FinsGateway Version 3 Embedded Edition is included with the CX-Position
package.
2. If FinsGateway Version 3 Embedded Edition is not installed, CX-Position
can be started up, but online operations are not possible. Only offline op-
erations can be performed.
3. CX-Position can also be used with FinsGateway Version 2.
4. For details on preparation required before installing FinsGateway, refer to
the FinsGateway User's Manual (PDF data).
Use the following procedure to install CX-Position, FinsGateway, and the
Serial Unit driver or Ethernet driver.
1. Insert the CD-ROM into the computer's CD-ROM drive.
After a dialog box indicating that setup preparation is taking place has
been displayed, the following window will be displayed.
2. Click Next. The Software Licence Agreement Dialog Box will be displayed.
3. Click Next and input the licence number (as printed on the Software Li-
cence Agreement/User Registration Card). The Destination Location Dia-
Section 2-1