Table of Contents
Advertisement
4.2 Buttons
Use the buttons on the left- and right-hand side of the control panel to switch your device or the operating mode on
and off.
Button
Function
On/Off
Start/Stop
4.3 Touch fields
Use the touch fields to select different functions directly.
The touch field for the function that is currently selected lights up red.
Touch field
Function
Menu
Timer
Information
Childproof lock
Open the control panel
4.4 Touch displays
The touch displays act as both displays and controls.
The touch displays are divided into several text fields.
The text fields show you the current selection options
and settings that have already been implemented. To
select a function, press directly on the corresponding
field.
The selected function is marked with a red vertical bar
on the side of the text field. The value for this is high-
lighted in white in the Display → Page 7.
The small red arrow next to the text field shows you the
function that you can scroll back to.
4.5 Control ring
You can use the control ring to change the setting val-
ues that are shown in the display and scroll in the
touch displays.
When you reach the minimum or maximum value avail-
able, this value remains in the display. If required, use
the control ring to turn the value back again.
4.6 Display
The display shows the current setting values on differ-
ent levels.
Value in the
The value in the foreground is high-
foreground
lighted in white. You can use the control
ring to change the value directly.
Once operation has started, the temper-
ature or level is displayed in the fore-
ground.
Use
Switch the appliance on or off.
Short press: Start or pause operation.
Press and hold for approx. three seconds: Cancel operation.
Use
Open the "Operating modes" menu.
→ "Operating modes", Page 8
Select the timer.
Display additional information about a function or setting.
Press and hold for approx. four seconds: Activate or deactivate the child-
proof lock.
Open the control panel to remove the water tank.
Value in the
background
Enlarge-
ment
Display ring
The display ring is located around the outside of the
display.
¡ Position indicator
¡ Progress indicator
Temperature display
The heating line and the residual heat indicator show
you the temperature in the cooking compartment.
Due to thermal inertia, the temperature that is displayed
may differ slightly from the actual temperature inside
the cooking compartment.
¡ Heating line
Familiarising yourself with your appliance en
Values in the background are displayed
in grey. To change the value using the
control ring, select the required function
in advance.
As long as you use the control ring to
change a value, only this value will be
displayed as enlarged.
If you change a value, the display ring shows you
where you are in the selection list. The display ring
may be continuous or divided into segments de-
pending on the settings area and the length of the
selection list.
During operation, the display ring displays the pro-
gress and turns red at second-long intervals.
As the cooking time counts down, one segment of
the display ring disappears every second.
Once operation has started, the white line below the
temperature turns red as the cooking compartment
heats up. When you are preheating the appliance,
the optimal time to place your food in the cooking
compartment is as soon as the entire line has
turned red.
With set levels such as grill settings, the heating line
turns red immediately.
7
Advertisement
Table of Contents
