Table of Contents
Advertisement
5.0 - ALARM POSITIONING FOR MAXIMUM
To ensure correct operation of the built-in motion sensor, install the alarm as
illustrated below.
1
OK
OK
2
45°
OK
MAX
Figure 1:
horizontal
positioning.
Figure 2:
maximum
applicable inclination.
3
PAGE 6
SENSITIVITY
OK
OK
45°
MAX
Figure 3: motion sensor
operation with alarm fitted
horizontally, siren facing up or
down.
The sensor will detect any
movement of the motorcycle
in any direction.
4
Figure 4: motion sensor operation with siren facing sideways (only for
vehicles with a side stand).
The alarm can be fitted on either the right or left side of the vehicle as long
as the siren is turned towards the right side of the vehicle (opposite to the
stand).
5
Figure 5: motion sensor operation
with alarm fitted vertically (only for
To prevent water from entering the
unit, the wire rubber sheath must be
NOTE: Prior to fitting, test the operation of the sensor to confirm it will work
in the intended position.
vehicles with a centre stand).
turned downwards.
PAGE 7
Advertisement
Table of Contents
