ANGLE FLOAT KIT (Standard Feature)
Machines are fitted with Angle Float as standard – when activated the feature connects the
base and gland circuits of the angle ram to allow free movement of oil in both directions
thus allowing the head to automatically angle itself to match the contours of the ground.
Refer to specific controls section for details of operation.
NOTE: On machines with V4 proportional controls any operation of the angle float
thumbwheel will override and de-activate the automatic angle float function, on release of
the thumbwheel it will revert back to automatic angle float.
Angle Float Off – Requires operator input to adjust flail head angle
Angle Float On – Flail head automatically angles itself to match the ground
contours.
30