Table of Contents
Advertisement
Operate Angle; rotate flail head to inverted position. Close taps on Lift Ram & switch OFF control unit.
Transport Height
There are no fixed dimensions for the machines transport height as this can vary for the
various differing applications i.e. tractor size, carrying height and dimensions of the
particular flailhead or accessory attached to the machine; for the majority of installations
the transport height will be in the region of approximately 2.7 to 3.0m.
your own measurements taken to ensure you have an accurate figure for transport height.
Always be aware of the transport height of your machine and proceed with care
when manoeuvring near building, bridges and all other overhead obstructions.
Transport Speed
The acceptable speed of transport will vary greatly depending on ground conditions; in any
conditions avoid driving at a speed which causes exaggerated bouncing as this will put
unnecessary strain on the tractors top hitch position and reduce control of the vehicles
steering.
It is advisable that once your machine has been installed on the
tractor that the machine is then folded into the transport position and
During transportation of the machine the PTO must be
disengaged, transport lock taps closed and power to the control
unit switched off.
Disengage PTO shaft during machine transport.
28
Advertisement
Table of Contents
