Table of Contents
Advertisement
TRACTOR PRE-OPERATION Inspection
Power Arm ID ________________ Date: _______________ Shift: _______________
WARNING
Before conducting the inspection, make sure the tractor engine is off, the key is removed
all rotation has stopped and the tractor is in park with the parking brake engaged. Any
implement attached to the tractor is firmly on the ground.
The flashing lights function properly.
All lights are clean and working correctly
All cab windows are clean and wipers working correctly
The SMV sign, where required, is clean and visible.
The tyres are in good condition with correct pressure.
The wheel nuts are tight.
The tractor brakes are in good condition.
The steering linkage is in good condition.
There are no visible oil leaks.
The hydraulic controls function properly.
The ROPS or ROPS cab is in good condition.
The seatbelt is in place and in good condition.
The 3-point hitch is in good condition.
The drawbar/pick up hook is secure & in good condition
The PTO master shield is in place.
The engine oil level is full.
The brake fluid level is full.
The power steering fluid level is full.
The fuel level is adequate.
The engine coolant fluid level is full.
The radiator & oil cooler are free of debris.
The air filter is in good condition
Operators Signature: ___________________________________________
Item
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
Condition at
Specific Comments if not O.K.
start of shift
Advertisement
Table of Contents
