Display
Residual heat indicator
WARNING!
Risk of burns from residual heat!
Operating the appliance
On and Off
Touch
for 1 second to start or stop the appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.
Remove the object or clean the control panel.
• you do not stop a cooking zone or change the heat setting after some time. See the
table.
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch
to increase the heat setting. Touch
shows the heat setting. Touch
Switching the outer ring on and off
You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field
To switch off the outer ring touch the sensor field
The child safety device
This function prevents an accidental operation of the hob.
Starting the child safety device
• Start the hob with
• Touch
comes on. Switch off the appliance.
Switching off the child safety device
• Start the hob with
• Touch
comes on. Switch off the appliance.
The automatic switch off is active
.
comes on.
-
6 hours
. Do not set the heat settings .
of the two front cooking zones at the same time for 4 seconds. The symbol
. Do not set the heat settings .
of the two front cooking zones at the same time for 4 seconds. The symbol
Description
-
5 hours
to decrease the heat setting. The display
and
at the same time to switch off the cooking zone.
Operating the appliance
4 hours
. The indicator comes on.
again. The indicator goes out.
7
-
1.5 hours