Operating The Appliance - Electrolux EHED 63 CS User Manual

Display
Pan detection
Residual heat
Child safety device
Power
Automatic Switch off
Residual heat indicator
Warning! Risk of burns from residual
heat. After being switched off, the
cooking zones need some time to cool
down. Look at the residual heat indicator
.

Operating the appliance

Use the induction cooking zones with
suitable cookware.
Switching the appliance on and off
Switch on
Touch
Switch off
Touch
After switching on, within approx. 10
seconds a heat setting or a function
Setting the heat setting
Increase Touch
Decrease Touch
Switch off Touch
The keep warm setting
and . It is used to keep food warm.
Using the automatic warm-up function
All cooking zones are equipped with an au-
tomatic warm-up function. The automatic
Step
1. Setting the maximum setting
2. Place to one side for a moment
3. Touch
Cookware is unsuitable or too small or no cookware
has been placed on the cooking zone
Cooking zone is still hot
Lock/Child safety device is set
Power function is switched on
Switch off is active
The induction cooking zones create the
heat required for cooking directly in the base
of the cookware. The glass ceramic is merely
heated by the residual heat of the cookware.
Control panel
for 2 seconds
for 1 second
Control panel
and at the same time
warm-up function sets the cooking zone to
lies between
the highest setting for a certain period of time
and then automatically switches back to the
cooking setting that was originally set.
Control panel
operating the appliance electrolux 5
Description
Residual heat can be used for melting
and keeping food warm.
Display
lights up
/
goes out
/ none
must be set, otherwise the appliance au-
tomatically switches itself off.
Display
to /
to
Display
/
/
Pilot light