madVR Labs Envy Setup Manual page 7

As discussed before, you can use the JVC's ability to rename Picture Modes to make its purpose clear. Here
you could use "HDR-Manual", for example.
This Picture Mode uses the same SDR "Content Type" that is used for regular SDR content in section 2.0.3.1
above. This is the reason it must be chosen manually, or by using a control system, to properly view HDR
content from the Envy.
For this option, you must set the HDR Flag menu option in the Envy to Off (see section 4.0.1.2).
3.0 Other Projector Settings
There are a few other settings that need to be made in the Projector, in addition to the settings covered in
For these settings, go to the Installation Menu (third option from the Left).
section 2.0.
madVR Envy – JVC Setup Guide
Copyright © madVR Labs, LLC. All rights reserved.