Dahua Active Deterrence Eyeball Quick Start Manual page 11

Enter the username and the password when you want to change IP, configure the

system, update the device, restart the device, and more.
Click OK.
Step 5
Select one or several devices in uninitialized status, and then click Initialize.
Step 6
Select the devices to be initialized, and then click Initialize.
Step 7
If you do not provide the linked information for password reset, you can reset the

password only through XML file.
When initializing multiple devices, ConfigTool initializes all devices based on the

password reset mode of the first selected device.
Step 8 Set and confirm the password of the devices, then enter a valid email address, and then click
Next.
Figure 2-2 Password setting
5
Quick Start Guide