Page 4
2 Product Appearance Figure 2-1 Figure 2-2 Figure 2-3 Please refer to the following sheet for more details about each port. Name Lens Reset/WPS button Micro SD card slot Network port Power port Indicator light Loudspeaker Sheet 2-1...
Page 5
Note: For reset, long press for 8 seconds and then the light off; For WPS, one quick press. Please refer to the following sheet for more details about status of indicator light. Device status Indicate light status Booting, device malfunction, fail to boot Red light spinning Booting completed, await wifi config, Green light spinning...
3 Operate by Easy4ip APP Step 1 Power on the device with power adapter. Step 2 Connect your smart phone to your WiFi network. Scan the “Easy4ip APP” QR on the packing box, download and install the Easy4ip APP. Step 3 Open Easy4ip APP (take IOS as an example), tap login to login the APP (Please register for first use).
Step 8 Waiting for 60s to finish the Wi-Fi connection. Figure 3-5 Note: If you want to change the Wi-Fi signal, please reset the camera to factory default and repeat step 5-8;...
4 Operate by DMSS APP Step 1 Power on the camera. Step 2 Connect iphone to a WiFi signal. Step 3 Open DMSS (downloaded from APP Store), choose Device Manager. Figure 4-1 Step 4 Click “+”, then choose “WiFi configuration”. Figure 4-2 Step5 Input a device name and scan the QR code on camera, then “next”.
Page 11
Figure 4-3 Step 6 Input the WiFi password, then “next”. Figure 4-4 Step 7 Connection succeeds.
Page 12
Figure 4-5 Figure 4-6 Figure 4-7 Note: Please try again or check the WiFi password if it failed. The WiFi configuration will be closed if activating WPS function, Please reset the device if you still need to configure WiFi via DMSS App.
If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. Dahua Technology Co., Ltd Address:No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC. Postcode: 310053...