Network Configuration; Initializing Device - Dahua Active Deterrence Eyeball Quick Start Manual

Device initialization and IP address setting can be finished with the ConfigTool or on web page. For
more information, see web operation manual.
Device initialization is available on select models, and it is required at first use or after the device

is reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108 by

default) and the PC stay on the same network segment.
Plan useable network segment properly to connect the device to the network.

The following figures and interfaces are for reference only.

2.1

Initializing Device

Step 1 Double-click ConfigTool.exe to open the tool.
Step 2 Click
Click Search Setting.
Step 3
Step 4 Select the searching way.
Current Segment Search (default)

Select the Current Segment Search checkbox. Enter the username in the Username
box and the password in the Password box. The system will search devices accordingly.
Other Segment Search

Select the Other Segment Search checkbox. Enter IP address in the Start IP box and
End IP box respectively. Enter username and password. The system will search the
devices accordingly.
If you select the Current Segment Search checkbox and the Other Segment Search

checkbox together, the system searches for devices under both conditions.
2

Network Configuration

.
Figure 2-1 Setting
4
Quick Start Guide