Using The Memory Function; Saving Embroidery Patterns - Baby Lock SOLARIS VISION BLSA3 Instruction And Reference Manual

USING THE MEMORY FUNCTION

Memo
• For more information about the memory
function, refer to "SPECIFICATIONS" in the
Instruction and Reference Guide (Sewing).

Saving Embroidery Patterns

Note
• Do not turn the main power to OFF while the
[Saving...] screen is displayed. You will lose
the pattern you are saving.
a
Touch when the pattern you want to
save is in the embroidery screen.
Memo
• You can also save the pattern by touching
in the embroidery edit screen.
USING THE MEMORY FUNCTION
b
When saving the embroidery pattern in a
USB media/SD card, insert the USB media/
SD card into the USB port/SD card slot on
the machine.
a SD card slot
b USB port
IMPORTANT
• Do not insert anything other than USB media
into the USB media port. Otherwise, damage
to the machine may result.
• Do not insert anything other than SD card into
the SD card slot. Otherwise, damage to the
machine may result.
c
Select the destination to start saving.
a b
a Save to the machine's memory.
b Save to the USB media.
The pattern is saved in a folder labeled [bPocket].
c Save to the SD card.
The pattern is saved in a folder labeled [bPocket].
d Temporarily save to the wireless function pocket.
For the detailed procedure, refer to the manual for
Palette (version 11 or later).
■ If the Memory Is Full
If the screen below displays, either the maximum
number of patterns have been saved or the pattern
you want to save takes a lot of memory, and the
machine cannot save it. Refer to "Retrieving
Embroidery Patterns" on page 102.
a
c d
3
101