Page 1
Software Update Version 3.51 August 2021 Introduction If the software version of your Solaris 2 (Model BLSA2) is earlier than version 3.51, an update program is now available for download to improve its performance. Note: Some memorized settings might be altered. For best results, test stitch before using saved stitches.
Page 2
1. Insert the USB Flash drive into the USB port on the computer. 2. Copy only the update file, XP_V351_taco_P.upf, to the USB Flash drive. Safely remove the USB Flash drive from the USB port on the computer. Copyright 2004-2021 Baby Lock USA Customer Support: 1-800-313-4110...
Page 3
6. Insert the USB flash drive into the USB port on the machine corresponding to the USB key pressed in step 5. USB port for media USB port for mouse USB flash drive Copyright 2004-2021 Baby Lock USA Customer Support: 1-800-313-4110...
Page 4
If the machine is connected to a wireless network, update files can be downloaded directly to the machine using this network. 1. Press , display the following screen, and then download the file using either method. Copyright 2004-2021 Baby Lock USA Customer Support: 1-800-313-4110...
Page 5
Be sure to NOT turn off your machine while the machine is saving the update software to itself. If the machine's power is turned off while saving the update software, it may result in damage to the machine. Copyright 2004-2021 Baby Lock USA Customer Support: 1-800-313-4110...
Page 6
BLSA2 Ver.3.51 Software Update – p.6 Baby Lock Solaris 2 (Model BLSA2) Update History Version 3.50 update provided the following changes: 1. The optional magnetic frame EMF180 can be recognized on the machine. The maximum embroidery area available for this frame is 130mm x 180 mm (5 inches x 7 inches).
Need help?
Do you have a question about the Solaris 2 and is the answer not in the manual?
Questions and answers