Attaching Embroidery Foot "W - Baby Lock SOLARIS VISION BLSA3 Instruction And Reference Manual

CHANGING THE PRESSER FOOT

Attaching Embroidery Foot "W"

CAUTION
• When attaching an embroidery foot, always
touch on the screen. You may
accidentally press the "Start/Stop" button and
possibly cause injury.
• Be sure to use the embroidery foot "W" when
doing embroidery. Using another embroidery
foot may cause the needle to strike the
embroidery foot, causing the needle to break
and possibly causing injury.
a
Remove the presser foot and presser foot
holder. For details, refer to "Removing the
Presser Foot" on page 9.
b
Position the embroidery foot "W" on the
presser foot bar by aligning the notch of the
presser foot to the large screw.
Side view
c
Hold the embroidery foot in place with
your right hand, and then use the included
multi-purpose screwdriver to securely
tighten the presser foot holder screw.
a
a Presser foot holder screw
CAUTION
• Use the included multi-purpose screwdriver to
firmly tighten the screw of the presser foot
holder. If the screw is loose, the needle may
strike the embroidery foot and break, possibly
cause injury.
10
d
Touch to unlock all keys and buttons.
 All keys and operation buttons are unlocked, and
the previous screen is displayed.