ABQ Industrial GalvanoTest 3000 Technical Reference And Operating Manual page 8

10 CLEAR-key for
- deleting the last reading
- setting default de-plating speed, default
sensitivity and default calibration
- interrupting printing process
- for error reset
10+ 4 CLEAR + STATS-keys:
- for deleting current statistics memory
11 UNIT: selected measuring unit
12 CAL: selected calibration
13 SENS: selected sensitivity
14 SPEED: selected de-plating speed
15 AREA: selected measuring area
16 METAL: selected coating material
E-4
17 cable socket:
to connect gauge to measuring stand
18 pump-keys:
for filling or emptying the inner measuring cell
19 mains switch
20 nameplate
21 socket for Y-Twriter
22 socket for MiniPrint 4100 data printer or RS 232C
23 power socket
24 fuse holder with supply voltage control
220V/50Hz or 110V/60Hz
Switching from 220V to 110V:
Remove fuse holder (24), turn 180 degrees and put
in place again.
ElektroPhysik