ABQ Industrial HORIBA U-50 Series Instruction Manual

HORIBA
Flow cell for U-50 series U-SOFC
The flow cell U-50FC is used to measure the pumped water stably by using the U-50 series.

• Warranty and Responsibility

HORIBA warrants that the Product shall be free from defects in material and workmanship and
agrees to repair or replace free of charge, at HORIBA's option, any malfunctioned or damaged
Product attributable to HORIBA's responsibility for a period of one (1) year from the delivery unless
otherwise agreed with a written agreement. ln any one of the following cases, none of the
warranties set forth herein shall be extended;
• Any malfunction or damage attributable to improper operation
• Any malfunction attributable to repair or modification by any person not authorized by HORIBA
• Any malfunction or damage attributable to the use in an environment not specified in this man­
ual
• Any malfunction or damage attributable to violation of the instructions in this manual or opera­
tions in the manner not specified in this manual
• Any malfunction or damage attributable to any cause or causes beyond the reasonable
control of HORIBA such as natural disasters
• Any deterioration in appearance attributable to corrosion, rust, and so on
• Replacement of consumables
HORIBA SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING FROM ANY
MALFUNCTIONS OF THE PRODUCT, ANY ERASURE OF DATA, OR ANY OTHER USES OF
THE PRODUCT.
• Trademarks
Generally, company names and brand names are either registered trademarks or trademarks of
the respective companies.

• For your safety

Waming messages are described in the following manner. Read the messages and follow the
instructions carefully.
e

Meaning of warning messages

&DAN G ER
/.\. WARN I N G
l_ll
&CAUTION
e
Symbols
Description of what should be done, or what should be followed
Description of what should never be done, or what is prohibited
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net
This indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury. This signal word is to be limited to the most extreme
situations.
This indicat � s a � tentially hazardous situation which, if not avoided, could result in
-
death or senous mJury.
This indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury. lt may also be used to alert against unsafe practices.
Without safety alert indication of hazardous situation which, if not avoided, could
result in
property damage.
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net
Distributed by: ABQ Industrial LP USA
CODE:GZ0000148943A
October, 2008 © 2008 HORIBA, Ltd.
lnstruction Manual
Distributed by: ABQ Industrial LP USA