Protect the surface of the product with cloth if you are using any product with rubber feet or base. ASSEMBLY TOOLS REQUIRED NOT INCLUDED Printed in Vietnam ITEM NO.: SH-4830X REVISED FEB 12, 2015 - 2 -...
Description Sketch Description Sketch Flat Washer bolt (M6x30mm) (ɸ6.5x13mm) Lock Washer Allen Key (M4x80mm) (ɸ6.5x11mm) Long Screw Short Screw (M4x30mm) (M3.5x15mm) Steel band Bracket Printed in Vietnam ITEM NO.: SH-4830X REVISED FEB 12, 2015 - 3 -...
Page 4
Insert Rails (E) into Side frames (D) as shown below. Attach other Side frame (D) to unit with Bolts (1) and washers (2) and (3). Tighten with Allen key (4). Printed in Vietnam ITEM NO.: SH-4830X REVISED FEB 12, 2015 - 4 -...
Page 5
Attach the Steel band (8) to the unit with screws (6). Then attach the Steel band to the wall with the Long screw (5) as shown below (to secure the product and prevent tipping). Printed in Vietnam ITEM NO.: SH-4830X REVISED FEB 12, 2015 - 5 -...