Table of Contents
Advertisement
Chapter 6: Appendix
CHAPTER 4: APPENDIX
4.1 Warning Messages
When any of these warning messages appear, check the following items.
Warning Message
No Signal
CHANGING THE FOLLOWING SETTINGS IN OSD MENU MAY
INCREASE THE POWER CONSUMPTION OF YOUR MONITOR.
DO YOU WANT TO CONTINUE TO CHANGE?
A C CE P T
You have been usng the monitor
for along time, please take a rest.
The LCD monitor cannot detect the
input source signal.
This warning message box will
only show when the menu feature
setting is changed for the first time.
C A N CE L
This reminder message will appear
after using the device for 4 hours.
Cause
18
Solution
√ Check if the input source is
turned ON.
√ Check if the signal cable is
properly connected.
√ Check if any pin inside the cable
connector is twisted or broken.
√ Press the ACCEPT button to
continue the setting changes,
or press the CANCEL button to
disable the setting changes.
Note: The operation may vary
from different product
models.
√ The pop-up notice will
disappear when pressing the
button or after 3 seconds.
Advertisement
Table of Contents
