Related Manuals for Jetson Jupiter
Summary of Contents for Jetson Jupiter
- Page 1 Princess Edition. Jupiter Light-Up Kick Scooter. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODEL: JPRNS-2KIK Designed in Brooklyn | Made in China...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 5: Table Of Contents
Contents Safety Warnings ......................4 Product Overview ......................6 Specs & Features . -
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 For more information go to www.p65warnings.ca.gov/product MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.
-
Page 8: Product Overview
Product Overview 1. HANDLEBAR 2. STEM CLAMP 3. STEM (LED LIGHT-UP) 4. FOLDING MECHANISM 5. FRONT WHEEL (MOTION-ACTIVATED LED LIGHT-UP) 6. LOCKING LEVER 7. KNOB 8. DECK (LED LIGHT-UP) 9. LIGHTING CONTROL BUTTON 10. BATTERY COMPARTMENT 11. REAR FOOT BRAKE 12. - Page 9 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 10: Specs & Features
Specs & Features • WEIGHT LIMIT: 132 LBS • PRODUCT WEIGHT: 6 LBS • WHEEL SIZE: 4” • FOLDED DIMS: 24”(L) × 10.5”(W) × 8.5”(H) • UNFOLDED DIMS: 24”(L) × 10.5”(W) × 29”(H) • DECK DIMS: 17.5”(L) × 3.5”(W) • HANDLEBAR HEIGHT: 29”- 34” •... -
Page 11: Unfolding/Folding The Scooter
1. Getting Started Unfolding/Folding the Scooter 1. LOOSEN THE KNOB. KNOB... - Page 12 2. OPEN THE LOCKING LEVER. (LOCATED ON THE OPPOSITE SIDE OF THE KNOB) LOCKING LEVER...
- Page 13 TO UNFOLD: 3. WHILE PULLING UP ON THE FOLDING MECHANISM, RAISE THE STEM UNTIL IT "CLICKS" INTO THE UPRIGHT POSITION. 4. CLOSE THE LOCKING LEVER AND TIGHTEN THE KNOB. LOWER TO FOLD. TO FOLD: 5. WHILE PULLING UP ON THE FOLDING MECHANISM, LOWER THE STEM UNTIL IT "CLICKS"...
-
Page 14: Handlebar Assembly
Handlebar Assembly 1. USING THE SCREWDRIVER TIP OF THE 2-BIT TOOL, UNSCREW THE PRE-ATTACHED BOLT AND NUT FROM THE BASE OF THE HANDLEBAR. 2. SLIDE THE HANDLEBAR ONTO THE SCOOTER STEM. 3. PUSH DOWN AND ADJUST UNTIL THE HOLES IN THE HANDLEBAR BASE ARE ALIGNED WITH THE HOLES IN THE STEM. 4. -
Page 15: Adjusting The Handlebar
Adjusting the Handlebar 1. OPEN THE STEM CLAMP LEVER. 2. USING THE ALLEN KEY TIP OF THE 2-BIT TOOL, LOOSEN THE KNOB TO WIDEN THE CLAMP. KNOB STEM CLAMP LEVER... - Page 16 STEM PIN 3. WHILE PRESSING IN THE STEM PIN, LIFT OR LOWER THE HANDLEBAR UNTIL THE PIN CLICKS INTO ANOTHER STEM PIN HOLE. 4. WHEN YOU HEAR IT CLICK, CLOSE THE STEM CLAMP LEVER AND TIGHTEN THE KNOB WITH THE ALLEN KEY. 5.
-
Page 17: Using The Brake
Using the Brake PRESS DOWN GENTLY WITH THE REAR RIDING FOOT TO SLOW DOWN. APPLY MORE PRESSURE TO COME TO A COMPLETE STOP. -
Page 18: Inserting The Batteries
Inserting the Batteries 1. OPEN THE BATTERY DOOR, LOCATED UNDER THE DECK, USING THE SCREWDRIVER TIP OF THE 2-BIT TOOL. 2. PLACE 3 AA BATTERIES INSIDE ACCORDING TO THE +/- DIRECTIONS INDICATED INSIDE THE BATTERY COMPARTMENT. 3. USE THE SCREWDRIVER TO SECURE THE BATTERY COMPARTMENT COVER. BATTERY COMPARTMENT... -
Page 19: Riding The Scooter
2. Making Moves Riding the Scooter 1. PLACE ONE FOOT ON THE FRONT OF THE DECK FACING FORWARD. 2. USE THE BACK FOOT TO PUSH OF THE GROUND AND PROPEL THE SCOOTER FORWARD. 3. TO COAST, PLACE THE KICKING FOOT ON THE DECK BEHIND THE FRONT FOOT AT A SLIGHT ANGLE. -
Page 20: Using The Led Lights
Using the LED Lights LIGHTING CONTROL BUTTON 1. QUICK-PRESS THE LIGHTING CONTROL BUTTON TO TURN ON THE LED LIGHTS. 2. YOU CAN CYCLE THROUGH 7 DIFFERENT LIGHT FUNCTIONS BY QUICK-PRESSING THE LIGHTING CONTROL BUTTON AGAIN. (THE 8TH TIME WILL TURN OFF THE LIGHTS.) 3. -
Page 21: Helmet Safety
Helmet Safety PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 22: Care & Maintenance
All new Jetson products, excluding parts and accessories, are warranted against defects in materials and workmanship for a period of one year from the date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support). - Page 23 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 24 US/CANADA: 1-888-976-9904 MEX: +001 888 976 9904 UK: +44 (0)33 0838 2551 Manufactured in Yongkang, China Imported by Jetson Electric Bikes LLC. P.O. Box 320149, 775 4th Ave #2, Brooklyn, NY 11232 www.ridejetson.com ©Disney Made in China www.DisneyPrincesses.com...
Need help?
Do you have a question about the Jupiter and is the answer not in the manual?
Questions and answers