Connecting the Handlebar: • Connect the four plugs according to color. Make sure the plugs clip in correctly. If you have any issues with the wires, please contact Jetson Customer Support. Tuck any excess wire into the Stem Tube. • Slide the Handlebar into the Stem Tube.
Page 5
• Loosen the Small Screw with a 2 mm Hex Key. • Use a flathead screwdriver to tighten and lower the Bolt. • Press the Release Lever against Stem until it locks. • Tighten the Small Screw. Operating the Element Pro Display Speed Mode Speedometer...
2. Make Moves Riding the Element Pro • Place one foot in front. • Place the other foot in back, at a 70-90° angle. • Turn the handlebar to the left or right to make turns. Using the Thumb Throttle...
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. And any use of such marks by Jetson Electric Bike LLC. is under license. Other trademarks and trade names are those of their respective owners.
Sudden or excessive application of the brake may result in injury or death. • If the brake loosens, please adjust with the hexagon wrench, or please contact Jetson Customer Support. • Replace worn or broken parts immediately.
Page 9
Hours of Operation: 7 Days a Week, 10am-6pm US 1-(888) 976-9904 | UK +44 (0)33 0838 2551 www.ridejetson.com Follow us @ridejetson #MakeMoves Imported by Jetson Electric Bikes LLC. 86 34th Street 4th Floor, Brooklyn NY 11232 Date Code: 08/2020 Made in China...
Need help?
Do you have a question about the Element Pro and is the answer not in the manual?
Questions and answers