Page 1
Hex Big Wheel Kick Scooter. A guide for your ride. IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY MODEL: JHEX-BLU | JHEX-PNK | JHEX-RED | JHEX-GRN Designed in Brooklyn | Made in China...
Page 3
Remember to be safe and, most importantly, have fun!
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;...
Page 7
For more information go to www.p65warnings.ca.gov/product MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from Jetson Customer Care. This will void any warranty, and can lead to malfunctions which may cause injury.
What’s in the Box 1. HANDLEBAR 2. STEM CLAMP 3. FRONT WHEEL 4. FOLDING LEVER 5. KNOB & LOCKING LEVER (ON OPPOSITE SIDE) 6. KICKSTAND 7. DECK 8. REAR FOOT BRAKE 9. REAR WHEEL TOOLS INCLUDED: ALLEN KEY *ADULTS MUST ASSIST CHILDREN IN THE INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.
Page 9
PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
1. Get Started Unfolding / Folding the Hex LOOSEN KNOB...
Page 13
OPEN THE LOCKING LEVER (LOCATED ON THE RIGHT SIDE OF THE HEX)
Page 14
LIFT UP THE FOLDING LEVER • RAISE STEM UP. ONCE YOU HEAR IT CLICK, IT’S FULLY UNFOLDED. • TIGHTEN THE KNOB AND CLOSE THE LOCKING LEVER. • REVERSE THESE STEPS TO FOLD THE HEX.
Assembly • ALIGN THE TOP OF THE HANDLEBAR CLAMP AND THE HANDLEBAR WITH THE PRE-DRILLED HOLES IN THE BOTTOM OF THE HANDLEBAR CLAMP. • PLACE BOLTS THROUGH THE TOP OF THE HANDLEBAR CLAMP, HANDLEBAR, AND THE BOTTOM OF THE HANDLEBAR CLAMP. •...
Adjusting the Handlebar STEM CLAMP • OPEN THE STEM CLAMP. • WHILE PRESSING DOWN THE BUTTON, LIFT OR LOWER THE HANDLEBAR. BUTTON...
Page 17
• WHEN YOU HEAR IT CLICK, TIGHTEN & CLOSE STEM CLAMP TO LOCK. MAKE SURE THE HANDLEBAR IS SECURE. CAUTION: THE STEM PIN WILL NOT KEEP THE STEM SECURE, PLEASE MAKE SURE THE STEM CLAMP IS TIGHTENED AND CLOSED PRIOR TO RIDING.
2. Make Moves Riding the Hex • PLACE ONE FOOT IN FRONT. • PLACE THE OTHER FOOT IN BACK AT 70 - 90°ANGLE. • TURN THE HANDLEBAR TO THE LEFT OR RIGHT TO MAKE TURNS. NOTE: ALWAYS BE SURE TO FOLD AWAY THE KICKSTAND WHEN IT IS NOT IN USE.
• AVOID INTENSE PHYSICAL IMPACT AND / OR SEVERE VIBRATION. • PLEASE RIDE THE HEX ON A SMOOTH, FLAT SURFACE. • PROTECT FROM WATER OR MOISTURE. • CONTACT JETSON CUSTOMER CARE IF THERE ARE ANY ISSUES WITH THE HEX. STORAGE • STORE THE HEX INDOORS, IN A DRY PLACE.
Page 22
Enjoying the ride? Leave a review on ridejetson.com/reviews or share your photos with us online using the #RideJetson hashtag! Follow us @ridejetson #MakeMoves...
Page 23
Questions? Let us know. support.ridejetson.com Hours of Operation: 7 Days a Week, 10am-6pm Manufactured by Zhejiang, China Imported by Jetson Electric Bikes LLC. 86 34th Street 4th Floor, Brooklyn, New York 11232 www.ridejetson.com Made in China Date Code: 05/2021...
Need help?
Do you have a question about the Hex Kick Scooter and is the answer not in the manual?
Questions and answers