Related Manuals for Jetson Jupiter Jumbo
Summary of Contents for Jetson Jupiter Jumbo
- Page 1 Jupiter Jumbo Light-Up Kick Scooter. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODELS: JJUPBW-BLK | JJUPBW-BLU | JJUPBW-RED | JJUPBW-PNK Designed in Brooklyn | Made in China...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 5: Table Of Contents
......................6 Specs & Features ......................8 Unfolding/Folding the Jupiter Jumbo ..................9 Assembly ... -
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 • Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death. • If the brake loosens, please adjust with the Jupiter Jumboagon wrench, or please contact the Jetson Care Team. • Replace worn or broken parts immediately.
-
Page 8: Product Overview
Product Overview 1. HANDLEBAR 2. STEM CLAMP 3. STEM (LED LIGHT-UP) 4. FRONT WHEEL 5. FOLDING MECHANISM 6. LOCKING LEVER KNOB (LOCKING LEVER LOCATED ON OPPOSITE SIDE) 7. DECK (LED LIGHT-UP) 8. LIGHTING CONTROL BUTTON 9. BATTERY COMPARTMENT 10. REAR FOOT BRAKE 11. - Page 9 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 10: Specs & Features
Specs & Features • WEIGHT LIMIT: 165 LBS • PRODUCT WEIGHT: 10 LBS • RECOMMENDED AGE: 8+ • FOLDED DIMS: 31.5”(L) × 15.7”(W) × 10.5”(H) • UNFOLDED DIMS: 31.5”(L) × 15.7”(W) × 36”(H) • HANDLEBAR HEIGHT: 32” - 36” • DECK DIMS: 23.6” × 6” •... -
Page 11: Unfolding/Folding The Jupiter Jumbo
1. Getting Started Unfolding/Folding the Jupiter Jumbo LOOSEN KNOB... - Page 12 OPEN THE LOCKING LEVER (LOCATED ON THE OPPOSITE SIDE OF THE KNOB)
- Page 13 TO UNFOLD: • WHILE PULLING UP THE FOLDING MECHANISM, RAISE THE STEM UP UNTIL IT "CLICKS" INTO THE UPRIGHT POSITION. • CLOSE THE LOCKING LEVER AND TIGHTEN THE KNOB. TO FOLD: • WHILE PULLING UP THE FOLDING MECHANISM, LOWER THE STEM UNTIL IT "CLICKS" INTO THE FOLDED POSITION. PULL UP THE FOLDING MECHANISM...
-
Page 14: Assembly
Assembly 1. USING THE SCREWDRIVER TIP OF THE 2-BIT TOOL, REMOVE THE PRE-ATTACHED BOLT AND NUT FROM THE HANDLEBAR BASE. 2. SLIDE THE HANDLEBAR ONTO THE SCOOTER STEM. 3. PUSH DOWN UNTIL THE PRE-DRILLED HOLES IN THE HANDLEBAR EACH ALIGN WITH A PRE-DRILLED HOLE ON ONE SIDE OF THE STEM. -
Page 15: Adjusting The Handlebar
STEM CLAMP LEVER KNOB Adjusting the Handlebar 1. USING THE ALLEN KEY TIP OF THE 2-BIT TOOL, LOOSEN THE STEM CLAMP KNOB. 2. OPEN THE STEM CLAMP LEVER. - Page 16 STEM PIN HOLE STEM PIN 3. WHILE PRESSING IN THE STEM PIN, LIFT OR LOWER THE HANDLEBAR. 4. WHEN YOU HEAR THE PIN CLICK INTO ANOTHER HOLE, CLOSE THE STEM CLAMP LEVER AND TIGHTEN THE KNOB WITH THE ALLEN KEY. 5.
-
Page 17: Inserting The Batteries
Inserting the Batteries BATTERY COMPARTMENT COVER 1. OPEN THE BATTERY COMPARTMENT COVER WITH THE SCREWDRIVER END OF THE 2-BIT TOOL. 2. INSERT 3 AA BATTERIES BASED ON THE +/-DIRECTIONS INDICATED IN THE BATTERY COMPARTMENT. 3. SCREW THE COMPARTMENT COVER BACK ON. -
Page 18: Using The Brake
Using the Brake PRESS DOWN WITH REAR FOOT TO SLOW DOWN. APPLY MORE PRESSURE TO COME TO A COMPLETE STOP. -
Page 19: Helmet Safety
Helmet Safety PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 20: Riding The Jupiter Jumbo
2. Making Moves Riding the Jupiter Jumbo 1. PLACE ONE FOOT IN FRONT FACING FORWARD. 2. PLACE THE OTHER FOOT BEHIND IT AT A 70 - 90° ANGLE. 3. USE THE BACK FOOT TO PUSH OFF THE GROUND AND PROPEL THE SCOOTER FORWARD. -
Page 21: Using The Led Lights
Using the LED Lights LIGHTING CONTROL BUTTON 1. QUICK-PRESS THE LIGHTING CONTROL BUTTON TO TURN ON THE LED LIGHTS. 2. QUICK-PRESS THE LIGHTING CONTROL BUTTON AGAIN TO CYCLE THROUGH 7 DIFFERENT LIGHTING STYLES. THE 8TH QUICK-PRESS WILL TURN THE LIGHTS OFF. 3. -
Page 22: Care, Maintenance, & Warranty
Care, Maintenance, & Warranty CLEANING TO CLEAN THE JUPITER JUMBO, CAREFULLY WIPE IT WITH A DAMP CLOTH AND THEN DRY IT WITH A DRY CLOTH. DO NOT APPLY WATER DIRECTLY TO THE JUPITER JUMBO: WATER MAY DAMAGE THE FRAME OR ELECTRICAL COMPO- NENTS, WHICH COULD RESULT IN A MALFUNCTION THAT PUTS RIDER SAFETY AT RISK. - Page 23 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 24 Made in China Date Code: 06/2022 © 2023, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.