Hand Held Products IK8560 User Manual page 39

Client Menu
On the main window, tap the Client menu.
Menu Item Description
Close Closes the Client's interface, while leaving the client running.
Start/Stop Starts or stops 802.1x operation. After you finish the initial configuration, tap the network interface
and tap Start. If the port is already active, tap Stop first, then Start to force the program to read
the new configuration file.
Restart Same as a Stop followed by Start. Select this menu item when you receive a message that a
restart is necessary.
Configure Opens the client authentication windows; see
Exit Terminates the client, which stops the 802.1x protocol.
View Menu
To access the View menu, tap View.
Menu Item Description
The Standard and Advanced Views control the number of columns displayed in the main menu.
Standard View Displays the Port (adapter name) and State columns. This is the default view.
Advanced View Displays the Port (adapter name), State, Primary Wireless Network, Wireless Network, and MAC
Address of AP columns. Scroll right to see all columns.
Event Log Displays the event log in a custom viewer. The Event Log
is a text file that contains system information; each entry
is listed sequentially with a time/date stamp and text
message.
Tap Refresh to query the system again and update the
log file while you are reading it. If the file gets too large,
old entries are automatically deleted.
Logging parameters are set on the
page 5-7).
Image Kiosk 8560/8570 User's Guide
Configuring Client Authentication
System Tab (see
Rev B
3/1/07
on page 5-5.
5 - 3