Adding Programs From A Network - Hand Held Products IK8560 User Manual

Adding Programs from a Network

However you establish your network connection–ethernet or wireless radio–you can download and install programs from a
network.
! When selecting programs, verify that the version of the program is designed for both Windows CE 5.0 and your I ntel XScale
processor. Check both by tapping Start > Settings > Control Panel > System > General tab.
1. When you have established your network connection, open Internet Explorer and navigate to the web site.
2. Download the program files to your device.
You may see a single EXE or setup.exe file, or several versions of files for different device types and processors.
If you are copying temporary files that are to be used once for the installation then discarded, then avoid copying them to the
IPSM folder since the contents of the IPSM folder are preserved over reboots.
3. Read any installation instructions, Redeem files, or documentation that comes with the program. (Many programs provide
special installation instructions.)
4. On the Desktop, double-tap the My Device icon
5. Tap the installation file. The installation wizard begins.
6. Follow the directions on the screen to install.
Image Kiosk 8560/8570 User's Guide
and navigate to where you copied the program files.
Rev B
3/1/07
4 - 9