Using The Magnetic Stripe Reader; Swiping A Card With The Msr Demo - Hand Held Products IK8560 User Manual

Using the Magnetic Stripe Reader

All IK8570 devices contain a magnetic stripe reader (MSR). To use the MSR, you must have an application installed on the Image
Kiosk that can read and process data from a magnetic stripe.
Fortunately, all Image Kiosks contain an MSR Demo that demonstrates some of the capabilities of the MSR.

Swiping a Card With the MSR Demo

1. Tap Start > Programs > Demos > double-tap MSR Demo
Note: The display area should read "Ready for MSR Swipe."
2. Make sure that the magnetic strip is facing down, towards the touch
screen display.
3. Slide the card from left to right or right to left as shown on the right.
4. MSR Demo reads the card, beeps, and displays the data according
to the options selected; see
5. You can swipe the card again and the new data will display. (Scroll up to see the data from the prior swipe.)
6. You can continue to swipe cards and read the data.
To clear all prior card reads, tap File > Clear.
7. To close the MSR Demo, tap File > Exit.
3 - 8
MSR Demo Options on page
Rev B
3/1/07
.
3-9.
Image Kiosk 8560/8570 User's Guide