Table of Contents
Advertisement
The camera module employs a 10x optical zoom and supports 16x digital zoom.
⚫ Lens Specification
F value: 3.3 mm to 33.0 mm (F1.8 to F3.4)
Horizontal view of angle: 59.2 degree (wide end) to 6.7 degree (tele end)
The following are zoom modes. A VISCA Command (CAM_Zoom Command) controls the
modes.
Standard Speed Mode
Zoom moves at fixed speed.
Variable Speed Mode
There are eight levels of zoom speed that can be set by a VISCA Command.
In these standard speed mode and variable speed mode, send Stop Command to stop
the zoom operation.
Digital Zoom On/Off
After the Optical Zoom has reached its maximum level (10x), the camera switches
to Digital Zoom Mode.
Direct Zoom Position setting
Setting the zoom position enables quick movement to the designated position.
Continues Zoom position Reply
With ZoomDirect mode, or when zooming according to a preset, the camera
outputs zoom position data when Continues Zoom position Reply is set to On via a
VISCA Command (CAM_ContinuousZoomReply Command).
Users can set the Interval Time using CAM_ReplyIntervalTimeSet Command.
Tamron Co., Ltd.
3.2 Zoom
11 / 79
Advertisement
Table of Contents
