⚫ AF Frame Setting
Using Focus detecting area selection in VISCA register setting command can set to
focus on a specific area.
This function is used when it is difficult for the normal autofocus to focus on the
desired subject.
The AF Frame area to be focused on is specified by dividing the entire screen into 7
(vertical) x 7 (horizontal) areas.
When setting this area, be sure to specify diagonal positions,
such as start point (2,2) and end point (3,2).
The default setting is (3,3)(5,5).
⚫ Focus Stop Position Setting
The register setting "Focus stop position" allows you to set the stop position when the
AF cannot find the focus position.
At slow speed mode (shutter time is longer than frame period) MP3010M-EV enters long
exposure mode so that the follow-up ability will be lower.
Tamron Co., Ltd.
14 / 79