Command
Command
General Command 81 01 04 38 02 FF
(Example)
81 01 04 38 FF
(Example)
81 01 04 38 02 FF
(Example)
81 01 04 08 02 FF
(Example)
Inquiry Command
81 09 04 38 FF
(Example)
81 09 05 38 FF
(Example)
Address Set
88 30 01 FF
IF_Clear(Broadcast) 88 01 00 01 FF
IF_Clear(For x)
8x 01 00 01 FF
Command Cancel
8x 2y FF
Command Message
Acknowledge
z0 4y FF(y:Socket No.)
Completion
z0 5y FF(y:Socket No.)
z = 9 to F: Device address +8
Tamron Co., Ltd.
4.5 VISCA Commands/ACK Protocol
Reply Message
90 41 FF (Acknowledge)
+90 51 FF(Completion)
90 42 FF 90 52 FF
90 60 02 FF(Syntax Error)
90 60 03 FF
(Command Buffer Full)
90 61 41 FF
(Command Not Executable)
90 62 41FF
90 50 02 FF(Completion)
90 60 02 FF(Syntax Error)
88 30 02 FF
88 01 00 01 FF
z0 50 FF (Completion)
z0 6y 04 FF
(Command Canceled)
z0 6y 05 FF (No Socket)
4.6 VISCA Camera-Issued Messages
ACK/Completion Messages
Comments
Returned when the command is accepted.
Returned when the command has been executed.
Comments
Returns Acknowledge when a command has been
accepted, and Completion when a command has
been executed.
Accepted a command which is not supported or a
command lacking parameters.
There are two commands currently being
executed, and the command could not be
accepted.
Could not execute the command in the current
mode.
Acknowledge is not returned for the inquiry
command.
Accepted an incompatible command.
Returned the device address to +1.
Returned the same command.
Acknowledge is not returned for this command.
Returned when the command of the socket
specified is canceled.
Completion for the command canceled is not
returned.
Returned when the command of the specified
socket has already been completed or when the
socket number specified is wrong.
54 / 79