Table of Contents
Advertisement
Software
Use of demonstration software developed by TAMRON or use of the software with
customer developed application software may damage hardware, the application
program or the camera module. TAMRON is not liable for any damages under these
conditions.
Operation and storage conditions
Do not shoot images that are extremely bright (e.g., light sources, the sun, etc.) for
long periods of time. Do not use or store the camera module in the following extreme
conditions:
Extremely hot or cold places (operating temperature -5 ˚C to +60 ˚C (23 ˚F to 140
˚F))
Close to generators of powerful electromagnetic radiation such as radio or TV
transmitters
Where it is subject to fluorescent light reflections
Where it is subject to unstable (flickering, etc.) lighting conditions
Where it is subject to strong vibration
Where it is subject to radiation from laser beams
Care of the unit
Remove dust or dirt on the surface of the lens with a commercially available blower.
Others
Please warn the top surface and a lateral board on the occasion of this plane handling
not to take excessive load. Disconnection may occur by the transformation of the
board inside and causes the trouble.
Please do not take excessive load on the sensor board which a back part has. The
sensor board is installed on a lens after adjustment precisely. When load increases,
influence may leave an optical axis gap, the sided blur, etc. in optics performance.
Tamron Co., Ltd.
2. Precautions
7 / 79
Advertisement
Table of Contents
