Configuring the Camera and Image Settings
2 Manual PTZ Control (Manual Pan, Tilt, and Zoom Adjustment)
Manually adjust the camera orientation and zoom.
Setting
Pan/Tilt Speed
Zoom Speed
Pan/Tilt
Zoom
3 Preset Sequence Program (Preset Sequence)
When Preset Sequence is turned ON in Mode Setting, specify the preset area.
Setting
No. 1 - No. 1
Number of Pre-
sets
Dwell time
1
Setting for the speed of movement. The smaller
the numeric value, the slower the speed, and
larger the numeric value, the faster the speed.
Clicking this moves in the specified direction.
When [Preset Sequence] is set to ON in Mode
Setting, specify the preset area number here.
Preset areas No. 1 - (10 - 18)
1 (10)
(1)
(16)
0 : No distortion compensation
19 : Compensated image (180°)
22 : Compensated image (120°)
Note:
•
When 10 - 18 is specified, the image is
magnified by digital zoom, causing the image
quality to be coarse.
Set the number of areas to display.
[Example] When set to 4:
The display order is No. 1 → No. 2 → No. 3
→ No. 4 → No. 1 →..., and the order of area
display is the setting that was entered (→ page
12), 4 → 6 → 0 → 0 → 4...
This is the retention time when switching modes. 0s - 10s
Details
Details
(11)
(1)
5 (1)
6 (15)
8 (1)
(18)
Range of Values
x1 - x10
−
Range of Values
0 - 19, 22
- 1