Nautilus EV9.16 Owner's Manual page 17

C H A N G I N G T H E G A M E I N H E A LT H A N D F I T N E S S
CONSOLE CODES
There are 4 groups of console codes as follows:
1. Customization (codes starting with 2 or 3)
2. Machine Status (codes starting with 4)
4. Diagnostic (codes starting with 6 or 7)
4. Configuration (codes starting with 8)
Each group of codes is defined below. To access
these console codes and the options within each
group, follow the instructions for each section.
Customizing the EV9.16 and E9.16
You can customize several parameters on the EV9.16
and E9.16 to conform to your individual requirements,
including changing the workout default values and
setting custom parameters such as time limits,
changing screen contrast, changing language, and
changing units.
30
™
To change the workout default values:
1. Press [Level: UP], [2], [ENTER]. The console
will display "DEFAULTS".
2. Press [Level: UP] or [Level: DOWN] to scan
through the default choices. Select the option
you want to change by pressing [ENTER]. Then,
use the [Level: UP] or [Level: DOWN] keys to
view the choices for the selected option. Press
[ENTER] to accept the choice for that option.
The default options are as follows:
Change default weight—Use the numeric keypad
or [Level: UP] or [Level: DOWN] keys to change
the desired default weight for your facility. Press
[ENTER] to accept the new value.
Change default workout time—Use the numeric
keypad or [Level: UP] or [Level: DOWN] keys
to change the desired default workout time
between 10 and 99 minutes. Press [ENTER] to
accept the new value.
Change default age—Use the numeric keypad or
[Level: UP] or [Level: DOWN] keys to change the
desired default age used to calculate target heart
rate. Valid age range is between 10 and 99 minutes.
Press [ENTER] to accept the new value.
Change default % Target HR—Use the numeric
keypad or [Level: UP] or [Level: DOWN] keys
to change the desired target HR value based on
maximum HR. This is used to calculate the target
heart rate value based on the % of maximum HR.
Valid target HR % is between 40 and 90%. Press
[ENTER] to accept the new value.
CONSOLE CODES
Change default Cool Down Time—Use the
numeric keypad or [Level: UP] or [Level:
DOWN] keys to change the desired default
cool down time between 1 and 10 minutes.
Press [ENTER] to accept the new value.
To customize the console for your use:
1. Press [Level: UP], [3], [ENTER]. The console
will display "CUSTOMIZE."
2. Press [Level: UP] or [Level: DOWN] to
scan through the customize choices. Select
the option you want to change by pressing
[ENTER]. Then, use the [Level: UP] or [Level:
DOWN] keys to view the choices for the
selected option. Press [ENTER] to accept the
choice for that option.
The customize options are as follows:
Max time limit—Use the numeric keypad to enter
the desired time limit between 5 and 99 minutes.
Press [ENTER] to accept the new time limit.
Change units—Use the [Level: UP] and [Level:
DOWN] keys to toggle between USA units and
Metric units. Press [ENTER] to select your option.
Choose the type of heart rate input.—See Heart
Rate Priority in the previous section for details of
the choices.
Choose console language—Use the [Level: UP]
and [Level: DOWN] keys to view the choices
(English, German, French, Spanish, Italian, Dutch,
Swedish, Japanese). Press [ENTER] to select
your option.
Adjust upper LCD screen contrast —Use the
[Level: UP] and [Level: DOWN] keys to increase
or decrease the contrast level of the upper LCD.
Press [ENTER] to select your option.
Adjust lower LCD screen contrast—Use the
[Level: UP] and [Level: DOWN] keys to increase
or decrease the contrast level of the upper LCD.
Press [ENTER] to select your option.
Reset Defaults—This code will reset all exercise
parameters to the factory defaults. Press [ENTER],
to accept the default values.
3. To exit "CUSTOMIZE", press the [CLEAR] key.
31