Product Introduction; System Diagram - Redx RX Series User Manual

2 Product Introduction

2.1 System diagram

The RX-2505PU system uses the grid and battery to ensure the continuous power supply of important
loads. The system allows users to store the energy from grid into the battery. It can also provide backup
power during the power outage
Solar
Wind
Figure 2-1 shows the application of the RX-2505PU all-in-one uninterruptible power system. RX-2505PU
contains inverter and battery storage modules. It is important to keep the installation environment well
ventilated and take necessary measures to control the ambient temperature to avoid the risk of explosion
caused by excessive battery temperature
Rev 20220610
Table 1-2 - Warnings continued
Product should not be installed in multiple phase combinations
The load capacity of the output of the inverter is as follows:
Inductive load (such as air conditioning, washing machine, motor, etc.) :
Single maximum power 1.5kVA, total inductive load maximum power 2.5kVA
(with grid power);
Capacitive load (e.g. computer, switching power supply, etc.) :
The maximum power of the total capacitive load is1.5kVA (without grid power);
The maximum power of the total capacitive load is 2.5KVA(with grid power).
Switchboard
Back-up
appliances
Figure 2-1 - System block diagram
Warning!
Warning!
Main switch
Cloud monitoring
and control
RX2505PU
Utility meter
Page 8 of 32
Grid