Redx 2505 PU Manual

The "230V AC IN" port has a plug which must be inserted into the
WARNING
"230V AC IN" port when no grid power is supplied to the unit!
RX-2505 PU
230V AC IN plug
External RCD Extension
Lead for UPS Loads
Redx 2505 PU Reference
240V guide – – NO GRID
• NOTE the "230V AC IN" port has a
plug which must be inserted into the
"230V AC IN" port when no grid
power is supplied to the unit. The
plug must be attached to the frame
of the unit.
• Attach the "230V AC IN" cap to the
chassis:
Remove one black chassis screw
near the 230V AC IN port.
Place the cord loop around the
screw.
Re-insert screw.
• External RCD ( Residual Current
Protection ) Extension Lead for the
UPS loads is required for maximum
safety.
• For more information, please scan
QR code or go to:
www.redxenergy.com.au