Maintenance - Physipro Contour Insert Owner's Manual

Owners manual
MAINTENANCE & CARE
Regular cleaning eliminates the accumulation of dirt and grime and may help
extend the life of your cushion. It is recommended to visually inspect the
components of the cushion during the cleaning process.
Clean the outer cover:
1. Remove cover from the foam base and fasten the zipper.
2. Machine wash in cold water on the gentle cycle or hand wash with a mild
detergent.
3. Allow to air dry completely.
4. Reinstall cover on the foam base.
No ironing required.
Cleaning the incontinence cover: Hand wash with soapy water and use a
clean dry cloth to gently wipe off excess moisture, then let air dry completely.
Cleaning the foam base:
1. Remove the outer cover and the incontinence cover and the insert.
2. Wipe lightly with a damp cloth, without soap or detergent.
3. Use a clean dry cloth to gently press on cushion to absorb excess moisture,
then let air dry completely.
4. Reinstall cover(s) on the foam base.
Do not use soap.
Do not submerge in water.
Never place foam base in washer or dryer.
Storage
Physipro cushions should be stored on a flat surface, in a dry area and out of
TM
direct sunlight.
Disposal of Medical Devices
Do not burn or throw away the cushion and its protective cover(s) outside of
designated areas.
30 C
11
ENGLISH