Soft Memory Foam & Urethane - Physipro Contour Insert Owner's Manual

ENGLISH
Insert Options
SOFT MEMORY FOAM & URETHANE
COMPOSITION
Top layer: Soft Memory Foam (blue)
Bottom layer: Urethane (yellow)
INSTALLATION
1. Install insert in the recess of the foam base, top layer (blue) facing upwards.
2. Reinstall cover(s) on the foam base.
MAINTENANCE
Regular cleaning eliminates the accumulation of dirt and grime and may help
extend the life of your insert.
1. Remove the insert from the foam base.
2. Wipe lightly with a damp cloth, without soap or detergent.
3. Use a clean dry cloth to gently press on foam to absorb excess moisture,
then let air dry completely.
4. Reinstall the insert in foam base.
Never place insert in washer or dryer.
14
Contour Insert
TM