INSTALLATION
1. Unfasten the snap button A.
2. Pull belt through the fixed loop B.
3. Position the protector pad as desired.
4. Fasten snap button A.
MAINTENANCE
Regular cleaning eliminates the accumulation of dirt and grime and helps extend the life of the protector pad.
A weekly cleaning is recommended.
Cleaning the protector pad
1. Remove the protector pad from the belt.
2. With a mix of water and a soft soap or neutral detergent, gently wipe the neoprene padding and then rinse
by wiping with water only.
3. Remove excess moisture by lightly patting the neoprene padding with a clean cloth and then let air dry
completely.
Storage
Postural supports must be stored in a dry and secure area.
WARNINGS
Never store your postural support in direct sunlight, near a heat source or in a high-humidity
•
environment.
Never place your postural support near sharp objects or in an area where it may be struck by an
•
object.
Disposal of Medical Devices
Do not burn or throw away medical devices outside of designated areas.
A
6
B
Révision 01
May 21