Insert Options; Waffle Gel & Urethane - Physipro Contour Insert Owner's Manual

ENGLISH

Insert Options

WAFFLE GEL & URETHANE
COMPOSITION
Top layer: Waffle Gel
Bottom layer: Urethane
INSTALLATION
1. Install insert in the recess of the foam base, top layer (Waffle Gel) facing
upwards.
2. Reinstall cover(s) on the foam base.
MAINTENANCE
Regular cleaning eliminates the accumulation of dirt and grime and may help
extend the life of your insert.
1. Remove the insert from the foam base.
2. Clean the gel layer:
a. Wipe lightly with a damp cloth, with water and a mild detergent.
b. Use a clean dry cloth to gently wipe off excess moisture, then let air dry
completely.
3. Clean the foam layer:
a. Wipe lightly with a damp cloth, without soap or detergent.
b. Use a clean dry cloth to gently press on foam to absorb excess moisture,
then let air dry completely.
4. Reinstall the insert in foam base.
Never place insert in washer or dryer.
12
Contour Insert
TM