Washing Sequence - Haier XPB90-99VGS User Manual

Washing sequence

Wash timer
(To set to below 2 minute, (standard current,
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
OFF
SILK
WOOL
STANDARD
COTTON
LINEN WASH SELECTOR
WASH TIMER
Wash
1.Water-filling selector
Set the water inlet selector at the "WASH" side.
(Figure 1)
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Wash selector Buzzer
(The buzzer will ring when
strong current)
the washing finishes)
STRONG
OFF
MAX
DRAIN
BUZZER
Using process
Using process
Water-filling selector
Water-filling entrance
XPB90-99VGS
SPIN TIMER
WASH SPIN
STRONG
STANDARD
WASH SELECTOR
OFF
WASH TIMER
STRONG
STANDARD
WASH SELECTOR
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
SILK
WOOL
Figure 1
Figure 2
DRAIN
Figure 3
SILK
WOOL
Figure 4
COTTON
LINEN
DRAIN
Figure 5