Table of Contents
Advertisement
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the lint filter
After opening the package, please take out the
lint filter from the document bag and install it
into the Filter frame of the inner tub. See to the right Figure.
Usage of the drain hose
The drainage shall be smooth with the drain hose
1.Put the drain hose up to suitable position
2.Do not step on or press the drain hose
Install the water inlet hose; Select the water level
Insert the water inlet hose into the water-filling
entrance on the control panel directly. (pull it
out to dismantle it)
Select water level according to the
quantity of the laundries.
Attention:
In water filling, do not exceed
the"Max" water level. Otherwise
the water may overflow out of the
washing machine.
Filter frame
Water inlet hose
Water level
adjusting lever
Max
Maximum
(about 83L)
Med
Medium
(about 68L)
Min
Minimum
(about 49L)
Before Using
Before Using
Lint filter
<1.2m
Water-filling
entrance
Advertisement
Table of Contents
