Table of Contents
Advertisement
Safety precautions
Contents marked with this symbol are
related to the safety information of the
products. Please operate in accordance to
the contents of this manual, to prevent
personal injury or property damage.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Do not install this appliance in a damp or
wet environment. Do not leave wet laundry
on the Control Panel or spray water
directly on to this appliance as this may
cause the washer to malfunction or cause
an electrical fault.
Do not contact to water exceed 50°C in
temperature.
Ensure the plug is removed and the taps
turned off in the following cases. Power
failure, cleaning, moving, installation and
when not in use.
The washing machine has ventilation
opening in the base, the opening must
not be obstructed by a carpet.
Do not wash water-proof clothing as this
may affect load balance during spin
cycle(s).
2
Ventilation hole at
the bottom of the
washing machine
Advertisement
Table of Contents
