Bellini BOT608X Installation & Operation Instructions page 16

Step 3
Troubleshooting
Faults
The upper crust is dark and
the lower part too pale
The lower part is dark and
the upper crust too pale
The outside is too cooked
and the inside not cooked
enough
The outside is too dry even
though of the right color
The appliance does not work
The oven lighting does not
work
*
New appliances could have a smell during first use. It is recommended to 'run in' the oven before you cook for the first time. Operate the
oven, empty, at a temperature of 180°C for approximately 2-4 hours. Please ensure the room is well ventilated during this process
Step 1
Causes
Not enough heat from the bottom
Excessive heat from the bottom
Too high temperature
Too low temperature
Break in power supply
Bulb is loose or damaged
Step 2
Step 4
Remedies
Use the natural convection position.
-
Use deeper cake tins.
-
Lower the temperature.
-
Put the cake on a lower shelf.
-
Use the natural convection position.
-
Use lower side tins.
-
Lower the temperature.
-
Put the cake on a higher shelf.
-
Lower the temperature and increase the
-
cooking time.
Increase the temperature and reduce the
-
cooking time.
- Check the household fuse box, if there is a
blown fuse replace it with a new one.
- Tighten up or replace the blown bulb. (See
chapter Cleaning & Maintenance).
12
.