Troubleshooting
WARNING! Do not disassemble the machine or repair it yourself.
Problem
Has plugged in power but the
product does not work
Remote Control does not work
Technical Specification
Model
Voltage
Frequency
Power
Swing Range
Timer Range
Motor
Humidifier Water Tank Capacity
Product Dimensions
Net Weight
Specifications are subject to change without prior notice.
If there is any inconsistency or ambiguity between the English version and the Chinese version, the
Chinese version shall prevail.
Refer to www.germanpool.com for the most up-to-date version of the Operating Instructions.
Possible Cause and Solution
Is the plug properly inserted into the socket?
Are the batteries dead?
Are the batteries inserted correctly?
Is the Remote Control aligned with the Signal Receiver?
EFB-426HM
220 V
50 - 60 Hz (Heater & Fan) / 50 - 60 Hz (Humidifier)
30 W (Cool Mode) / 1800 W (Warm Mode) / 5 W (Humidifier)
80°
1-8 hours
BLDC Brushless Direct Current Motor
320 ml
(H)1010 mm (W)235 mm (D)235 mm
3.8 kg
P.16
Need help?
Do you have a question about the EFB-426HM and is the answer not in the manual?