Page 1
DC Motor SlimTower EFB-326H Bladeless Heater & Fan Online Warranty Registration Please read these instructions and warranty information carefully before use and keep them handy for future reference. U S E R M A N U A L...
Tables of Contents Safety Instructions Product Structure Getting Started Operating Instructions Cleaning & Maintenance Please register your warranty information now! For Warranty Terms & Conditions, Troubleshooting please refer to the last page of this user manual. Technical Specifications 請即進行保用登記﹗ Warranty Terms & Conditions 有關保用條款細則,請看本說明書最後一頁。...
Safety Instructions Safety Instructions • To avoid burning when using this product, please do not let bare skin directly contact with the Warnings! surface of the air outlet; To avoid fire, electric shock, or personal injury, please be sure to observe the following requirements; •...
Product Structure Getting Started Location This product uses PTC heating, send heat by hot air, which can quickly increase room temperature. It is • Please put this product in a horizontal position. without open flame, safe, efficient and energy saving. Avoid putting it on a slope or a soft surface to FRONT BACK...
Operating Instructions Operating Instructions Remote Control Power Button :Turn Off :Turn On Turning On and Off Watch the video clip Insert the plug into the socket, turn on power switch and the product enters the standby state. Press and hold Power Button for 1 second, the buzzer will beep once and the product start running.
Page 6
Operating Instructions Operating Instructions Remote Control The device can be switched on and off by pressing the "On / Off" Button The Remote Control should be pointed at the Remote Control Signal Receiver on the display to On/Off maximize the remote control signal. Effective distance: 5M. Press “Sleep Mode”...
Operating Instructions Cleaning & Maintenance Warm Mode Instructions Press the “Warm Mode” Button and the display shows the ambient temperature. Caution: Unplug the power supply before performing maintenance. Press the “+ / -” on the right side to set the Temperature, and the digital display will be flashing, which can be set to 1-30°C.
Troubleshooting 目錄 注意事項 Caution: Do not disassemble the machine or repair it yourself. 產品結構 Problem Possible Cause and Solution Has plugged in power but the Is the plug properly inserted into the socket? 使用前的準備 product does not work Remote Control does not work Are the batteries dead? Are the batteries inserted correctly? 操作說明...
- the serial number is modified, damaged or removed from the product. - 機身編號被擅自塗改、破壞或刪除。 4. German Pool will, at its discretion, repair or replace any 4. 總代理有權選擇維修或更換配件或其損壞部份。 defective part. 5. This warranty will be void if there is any transfer of 5.