German pool EFB-426HM User Manual page 10

Uvc air purifier mist heater & fan
Table of Contents

Advertisement

Operating Instructions
The product can be switched on and off by pressing the "On / Off" Button
On/Off
Press "Sleep Mode" Button on the Remote Control.
The display shows "LL" and the fan speed becomes lowest.
Press again to exit Sleep Mode.
Sleep Mode
(You can also exit the current mode by pressing the Wind Strength + - button.)
Press "High Cool" Button on the Remote Control.
The display shows "HH" and the fan speed become highest.
Press again to exit High Cool Mode.
High Cool
(You can also exit the current mode by pressing the Wind Strength + - button.)
Press "Oscillation" Button to turn on the Oscillation Function.
This fan can swing left and right at 80º. Press this button again to stop oscillation.
Oscillation
Press "UVC" Button to activate UVC Disinfection function, display panel will show "U".
UVC
Press button again to turn off UVC Disinfection function (otherwise UVC Disinfection
Sterilization
will automatically turn off after 1 hr).
Press "Cool Mode" Button to activate the Cool Mode.
During Cool Mode, the LED Display does not show "ºC".
Cool Mode
Note: The default Start Mode is Cool Mode.
Press "+" Button on the left side of the Remote Control to increase the volume of air;
press the "-" Button on the left side of the Remote Control to decrease the volume
Increase /
of air.
Decrease
Cool Mode can be used for 9-level settings, Warm Mode can be set for 4 levels.
Air Volume
Press "Warm Mode" Button to activate Warm Mode.
During Warm Mode, LED Display shows "ºC".
Warm Mode
Note: During Warm Mode, both High Cool and Sleep Mode are not available.
In Warm Mode, press "+ -" Buttons on the right side of the Remote Control to set the
Raise /
Temperature (1-30°C).
Reduce
Note: this button does not work during Cool Mode.
Temperature
Press "Timer" button to set off-timer for 1 to 8 hours. After timer is set, all other
functions are still operable. When timer countdown is completed, the product will
automatically stop operating; if user wishes to restart the product, please press "On/
Timer
Off" Button again. When the product is powered off, the timer will also be cancelled.
P.10

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EFB-426HM and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents