Figure 71 - Test Fit The Rack Slide Assembly Into Your Rack; Figure 72 - Attach Slides To Front Of Rack - ACOEM Met One Instruments GAS-1060 User Manual

Figure 71 – Test Fit the Rack Slide Assembly into Your Rack
7. Install the two assembled outer slide rails onto the left and right side of the rack securely with
M6 bolts; washer and locknuts/cage nuts (refer to Figure 72).
Figure 72 – Attach Slides to Front of Rack
8. Now carefully insert the instrument into the rack by fitting the instrument slides into the
mounted rails. Ensuring that the rack slide locks engage on each side (you will hear a click from
both sides).
When installing this instrument ensure that appropriate lifting equipment and
procedures are followed. It is recommended that two people lift the instrument
into the rack due to the weight, unless proper lifting equipment is available.
Optional Extras
CAUTION
Page 129