Figure 156 - Test Fit The Rack Slide Assembly Into Your Rack; Figure 157 - Attach Slides To Front Of Rack - ACOEM Serinus 40 User Manual

Ser in u s ® 40 U ser M an u al 3 .5
6. Test fit the rack slide into your rack to determine the spacing of the rack mount adaptors.
Figure 156 – Test Fit the Rack Slide Assembly into Your Rack
7. Refer to Figure 157. Install the two assembled outer slide rails onto the left and right side of the
rack securely with M6 bolts; washer and locknuts/cage nuts.
8. Now carefully insert the instrument into the rack by fitting the instrument slides into the mounted
rails. Ensuring that the rack slide locks engage on each side (you will hear a click from both sides).
When installing this instrument ensure that appropriate lifting equipment and
procedures are followed. It is recommended that two people lift the instrument
into the rack due to the weight, unless proper lifting equipment is available.
Note: Ensure both sides of the inner slide are attached to the outer slides before pushing into the
Page 182
Figure 157 – Attach Slides to Front of Rack
rack fully.
CAUTION