Philips HR 7717 Operating Instructions Manual page 9

For disassembling
proceed in reverse.
- Set the speed control
to the advised position
(fig. 48).
- Press either button M
or button A to switch on
(fig. 49, 50).
49
For optimum speed and the appropriate switching
on mode please refer to the tables.
Tips:
• Liquid ingredients (e.g. oil for the preparation of
mayonnaise) can be added through the small
aperture in the
protective cap
(fig. 51).
• To add ingredients
when the motor is
running you can
unlock and remove
the protective cap
(fig. 52, 53).
52
• If blending is prolonged the results will generally
be finer.
• From time to time, it may be necessary to
interrupt the blending and remove particles
sticking onto the jar.
- First switch off and unplug.
- Then remove the protective cap and the lid.
Use a soft spatula. Keep this at a safe distance
(approx. 2 cm or 1") from the blades.
48
50
51
53
Cleaning
• Always remove the plug from the wall socket
before cleaning the motor unit. The motor unit
may be wiped with a damp cloth.
Never immerse the motor unit in water.
Never pour water over it.
• Wash the items which have been in contact with
the food in warm soapy water immediately after
use. Do not clean in a dishwasher.
• Take care when cleaning the metal blade and
slicing disc: the cutting edges are very sharp!
• Ensure that the cutting edges do not come into
contact with hard objects as this might make
them blunt.
54
1
2
3
• The gear of the whisk accessory can be easily
disassembled to enable thorough cleaning
(fig. 54, 55).
Symbols in the tables
£ = metal blade (F)
§ = slicing disc - thin/thick (G)
• = grating disc - medium/coarse (H)
¶ = grating disc - extra fine/fine (I)
ß = whisk (J)
^ = kneading accessory (K)
® = blender accessory (R - W)
9
55