Okamura Phlox Chair Instructions For Use

Okamura Phlox Chair Instructions For Use

Lounge chair

Advertisement

5. Instructions to Extend the Life of Product

Daily care
[Cloth part]
● Brush with a soft brush or tap the surface
softly and vacuum to remove dust to avoid
damaging the cloth.
● When it gets dirty after extended period
of time, wipe with a well wrung soft cloth
moistened with thin neutral detergent. Wipe
clean with a damp cloth. Be sure to wipe
detergent completely and wipe again with a
dry cloth to dry it.
●When using alkaline electrolyzed water to
remove stains, spray directly on the stain and
brush with a soft brush taking care not to
damage the cloth. Then, wipe the moisture
and stain to remove and wait for the cloth to
dry.
● When it gets an oily stain, dab and remove
it by using a dedicated stain remover
immediately. Then wipe with a soft cloth
dampened with water, followed by a dry cloth
to dry. Stains may be permanent depending
on the material.
Please be careful.
●Remove stains as quickly as possible.
●Avoid causing a circular stain, remove
not only the stain but also wipe off
thoroughly around the stain.
● Try the cleaner on inconspicuous area first
since the surface may discolor or deteriorate
by using it.
[Aluminum part]
●Wipe with a clean, dry, soft cloth.
● I m m e d i a t e l y w i p e o f f a n y w a t e r o r
fingerprints (sebum). Please note that the
aluminum portion will get oxidized to lose its
gloss and deteriorate the texture if the chair
is left with water or fingerprints (sebum)
attached.
[Leather part]
●Wipe with a clean, dry, soft cloth.
●Immediately wipe off any liquid with a dry
cloth. If dirt cannot be removed, wipe using
a cloth moistened with slightly warm water.
Please be careful.
●Do not use an organic solvent such
as thinner and benzene, alcohol, a
chemical cloth or a shoe cleaner.
Please note that the chair with its
color or texture deteriorated cannot
be restored to its original state.
[Wooden Part]
●Gently wipe with a clean, dry, and soft cloth
in the direction of the grain.
●When it gets exceptionally dirty, wipe off the
dirt with a well wrung soft cloth moistened,
and wipe again with a dry cloth to dry it.
Please be careful.
●Do not use the following items which
will damage the coating.
◎Thinner, benzene, alcohol, lacquer, oil,
vinegar, boiling water, polishing powder, etc.
●Do not frequently wipe with a cloth
m o i s t e n e d , o t h e r w i s e , t h e w o o d
portion will be cracked.
[Resin Part]
●Wipe with a well wrung soft cloth moistened.
●If dirt is noticeable, wipe it off with a well
wrung soft cloth moistened with thin neutral
detergent. Be sure to remove detergent
completely with a damp cloth and wipe again
with a dry cloth to dry it.
G150J4/2022-05
Lounge Chair
Instructions for Use

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Phlox Chair and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Okamura Phlox Chair

  • Page 1 5. Instructions to Extend the Life of Product Daily care [Cloth part] [Leather part] Lounge Chair ● Brush with a soft brush or tap the surface ●Wipe with a clean, dry, soft cloth. softly and vacuum to remove dust to avoid ●Immediately wipe off any liquid with a dry damaging the cloth.
  • Page 2 Please follow the instructions below. Failure may cause damage to the product. In that case, Information on Graphic Symbols Okamura will not take any responsibility or liability for any phenomena caused. This Instruction Manual and indications on the products use various types of symbols to help you...
  • Page 3 3. How to use the product 3. How to use the product Parts Name [Chair Tilt Lock] If you lean against the back of an aluminum- legged conference chair or an aluminum-legged lounge chair, the chair will fall over backwards. The angle of the back rest is locked to a range of -4°...
  • Page 4 3. How to use the product 5. Instructions to Extend the Life of Product Troubleshooting Operating Precautions and Maintenance ●If the product has become unsteady due to ●Casters Problem Check Solution Page loosening of the bolts or screws during use, Casters should be replaced when they are Are you sitting on the seat when adjusting Adjust the seat height while not...

Table of Contents